THREAD MILLS

Name: AB TOOLS, INC.
Address: 1051 Aviation Blvd., Lincoln, CA, 95648
Telephone: (916) 408-2442
Rating: 5.0

SOLID CARBIDE

With these TWELVE solid carbide thread mill cutters from AB Tools, Inc, you can mill Coarse or Fine threads from No.3 thru 3/4 and from 2mm thru 24mm. Special orders in 4-6 working days. Proudly made in the USA by AB Tools, Inc.

Number	NC	NF	Cut Dia.	Crest	Neck Dia.	Neck Lgth*	Shank	OAL	Flutes	No-Coat	AITiN
TM3	#3	2MM	.072	.001	.040	.160	3/16	2	1	$70	$74
TM4	#4	3MM	.083	.001	.045	.190	3/16	2	1	$70	$74
TM4	#5	3.5MM	.083	.001	.045	.190	3/16	2	1	$70	$74
TM6	#6	4MM	.099	.0015	.055	.260	3/16	2	2	$70	$74
TM8	#8	4.5MM	.128	.002	.083	.320	3/16	2	3	$75	$79
TM10	#10	5MM	.139	.0025	.081	.380	3/16	2	3	$75	$79
TM1/4	1/4	6MM	.188	.003	.124	.400	1/4	2	4	$80	$84
TM5/16	5/16	8MM	.247	.003	.175	.500	3/8	2.5	4	$95	$102
TM3/8	3/8	10MM	.300	.003	.218	.600	3/8	2.5	4	$100	$107
TM7/16	7/16	12MM	.330	.0035	.184	.600	3/8	2.5	-	$105	$112
TM1/2	1/2	16MM	.420	.0035	.300	.800	1/2	2.5	6	$125	$134
TM5/8	5/8	20MM	.500	.0026	.307	1.00	5/8	3.5	6	$170	$183
TM3/4	3/4	24MM	.625	.0026	.416	1.25	3/4	4	6	$230	$245

*Necks ground longer on request with minimal charges based upon quantity.

Suggested Starting Data:
Ferrous 150/300 SFM: .002/.001 IPT
Non-Ferrous 500/1000 SFM: .0005/.0015 IPT
Interpolate helix from bottom up.

SPECIALS IN 4-6 WORKING DAYS