AB Tools Inc. small logo

SHEAR-HOGS®

T-SLOT

T-Slot Shear Hogs will also rough mill aluminum at 6 CIM per HP at the spindle. They are not intended to be used as finish slotting tools on the diameters. Designed for non-ferrous part materials only, the insert edge is too sharp to machine ferrous part materials and will chip too quickly. Proudly made in the USA by AB Tools, Inc.

T-Slot Shear-Hogs

Cutting diameters are not for finishing profiling with T-Slot Shear-Hogs.

Inserts can be spun ground in T-Slot Shear-Hogs to cut straight in that tool only at an additional charge.

Number Cut Ø Shank Dia.** OAL Number of Flutes Price Incl. Inserts
TS 150 1.50 3/4 4.5 2 $445
TS 175 1.75 3/4 5.5 2 $475
TS 200 2.00 1.0 6 2 $520
TS 250 2.50 1.0 5.5 4 $550
TS 325 3.25 1-1/4 6 4 $675
TS 400 4.00 1-1/4 7 4 $775
TS 450 4.50 1-1/4 7 6 $825

** We can modify shanks to smaller sizes. Price & lead time based on specific request.

LH/RH Inserts same price

Shear-Hog Inserts Corner Price
ADEH-430 Sharp $19.50 ea.
ADEH-431 .010 R $19.50 ea.
ADEH-432 .030 R $19.50 ea.
ADEH-434 .060 R $19.50 ea.
ADEH-436 .090 R $21.50 ea.
ADEH-438 .120 R $21.50 ea.
ADEH-45 .015 x 45° $21.50 ea.
Extra Insert Features Price
.002 Honed Edge $3.00
AlTiN Coat $4.25
DLC Coat $5.75
Honed Edge & AlTiN Coat $7.25
Insert Screws and Wrench
3.5mm-SH (2012 and newer) $2.00 ea.
8-32-SH (older than 2012) $2.00 ea.
T15 Wrench $7.50 ea.

NEED TO PLACE AN ORDER?

FIND A LOCAL DISTRIBUTOR

IF ANY PRODUCT IS NOT SATISFACTORY WE WILL MODIFY, REPLACE, OR REFUND.

AB TOOLS, Inc.

Manufacturing High Performance Rotary Cutting Tools since 1977

1051 Aviation Blvd. | Lincoln, CA 95648

Fax: (916) 993-3949


© web design by one eleven stockton, ca