ALUMA-HOGS

Name: AB TOOLS, INC.
Address: 1051 Aviation Blvd., Lincoln, CA, 95648
Telephone: (916) 408-2442
Rating: 5.0

We introduced these in 1982 and they became very popular roughing tools and finish face milling tools. They use modified industry standard inserts with a wiper flat ground on them. We still stock them even though the Shear-Hogs® (since 1997) outperform Aluma- Hogs in so many ways. Proudly made in the USA by AB Tools, Inc.

Number	Dia.	Shank Dia.	OAL	Cut Length	Insert & Qty.	Clamp	Shim	Price Incl. Inserts
ALH1A	1.0	3/4	3.75	1/4	TEG2.522 (2)	CL1		$240
ALH1B	1.0	1.0	3.75	1/4	TEG2.522 (2)	CL1		$240
ALH1-5/16	1.312	3/4	3.75	1/2	TFG32MF (2)	CL2		$295
ALH1-7/8A	1.875	3/4	3.87	3/4	TEG42MF (2)	CL3		$315
ALH1-7/8B	1.875	1.0	4.12	3/4	TEG42MF (2)	CL3		$315
ALH2	2.0	1.0	4.12	3/4	TEG42MF (2)	CL3		$360
ALH3S	3.0	1.0	4.12	3/4	TEG42MF (3)	CL3	SM37	$455
ALH4S	4.0	1.0	4.12	3/4	TEG42MF (4)	CL3	SM37	$590

Suggested Starting Data:
Non-Ferrous ONLY
500/2,000 SFM; .002/.010 IPT
10,000 max RPM

Inserts/Hardware	Relief Angle	Price
TEG2.522 (.031 R)	20°	$14
TEG2.52MF (Mill Flat)	20°	$16
TFG322 (.031 R)	25°	$14
TFG32MF (Mill Flat)	25°	$16
TEG422 (.031 R)	20°	$17
TEG42MF (Mill Flat)	20°	$19
CL1 or CL2 Clamp		$18.50
CL3 Clamp		$24
SM37 Shim, Modified		$18

Screws included with any Clamp/Shim orders.