SHEAR-HOGS^®

SHANK STYLE

Shear Hogs introduced in 1977, the Shear Hogs are our best stock product rough milling aluminum at 6 CIM per HP at the spindle. They are also very good at slower feeds as finish face milling tools. Designed for non- ferrous part materials only, the insert edge is too sharp to machine ferrous part materials and will chip too quickly. Proudly made in the USA by AB Tools, Inc.

Number	Dia.	Shank Dia.	OAL	Number of Flutes	Ramp Angle	Price
SH100	1.0	3/4	4.0	1	Drills in Z!	$240
SH100-6	1.0	3/4	6.0	1	Drills in Z!	$295
SH125	1-1/4	3/4	4.0	2	8°	$270
SH125-1	1-1/4	1.0	4.0	2	8°	$285
SH125-6	1-1/4	1.0	6.0	2	8°	$365
SH125-9	1-1/4	1.0	9.0	2	8°	$480
SH150	1-1/2	3/4	4.0	2	5°	$315
SH150-1	1-1/2	1.0	4.5	2	5°	$325
SH150-7	1-1/2	1-1/4	7.0	2	5°	$405
SH150-8	1-1/2	1.0	8.0	2	5°	$435
SH200-3/4	2.0	3/4	4.5	3	4°	$375
SH200-1	2.0	1.0	5.0	3	4°	$375
SH200-7	2.0	1-1/4	7.0	3	4°	$455
SH200-9	2.0	1-1/4	9.0	3	4°	$515
SH300-3/4	3.0	3/4	5.0	4	None	$505
SH300-1	3.0	1.0	5.0	4	None	$505
SH300-1.25	3.0	1-1/4	5.0	4	None	$505
SH400-1.25	4.0	1-1/4	5.5	4	None	$660
SH450	4-1/2	1-1/4	5.5	5	None	$745

Insert screw torque to 28-30 in lbs.

All cutter prices include Inserts, Screws, and Wrench, assembled and ready to cut.

Shear-Hog Inserts	Corner	Price
ADEH-430	Sharp	$21 ea.
ADEH-431	.010 R	$21 ea.
ADEH-432	.030 R	$21 ea.
ADEH-434	.060 R	$21 ea.
ADEH-436	.090 R	$23 ea.
ADEH-438	.120 R	$23 ea.
ADEH-45	.015 x 45°	$23 ea.

Extra Insert Features	Price
.002 Honed Edge	$3
AlTiN Coat	$5
DLC Coat	$6
Honed Edge & AlTiN Coat	$8

Insert Screws and Wrench
3.5mm-SH (2012 and newer)	$2 ea.
8-32-SH (older than 2012)	$2 ea.
T15 Wrench	$10 ea.

SHEAR-HOGS®

SHANK STYLE

SHEAR-HOGS^®