CARBIDE O-RING METRIC DOVETAIL CUTTERS

Name: AB TOOLS, INC.
Address: 1051 Aviation Blvd., Lincoln, CA, 95648
Telephone: (916) 408-2442
Rating: 5.0

These stock metric dimension cutters conform to the standards suggested by the Seal Division of Parker Hannifin Corp. On-size and undersized diameters are also in stock. Proudly made in the USA by AB Tools, Inc.

SPECIALS IN 4-6 WORKING DAYS

Solid Carbide Dovetail Cutters for O-Ring Grooves 1

Number	O-Ring Size	Neck Ø TSC	Neck Ø Over R	Slot Depth	Top Rad.	Bottom Rad.	Major Ø
DT3MM	3MM	.096	.102	.094	.010	.016	.162
DT3.5MM	3.5MM	.110	.121	.110	.010	.031	.1745
DT4MM	4MM	.122	.133	.126	.010	.031	.201
DT4.5MM	4.5MM	.138	.149	.144	.010	.031	.232
DT5MM	5MM	.152	.162	.163	.010	.031	.264
DT5.5MM	5.5MM	.165	.183	.181	.010	.031	.293
DT6MM	6MM	.179	.196	.199	.016	.031	.323
DT6.5MM	6.5MM	.193	.210	.2165	.016	.031	.352
DT7MM	7MM	.207	.224	.234	.016	.059	.352
DT7.5MM	7.5MM	.2205	.238	.252	.016	.059	.381
DT8MM	8MM	.236	.258	.270	.020	.059	.413
DT8.5MM	8.5MM	.250	.272	.289	.020	.059	.444
DT9MM	9MM	.264	.285	.307	.020	.059	.473
DT9.5MM	9.5MM	.278	.299	.323	.020	.059	.501
DT10MM	10MM	.291	.313	.3425	.020	.059	.533

Reference Chart

Number	No. of Flutes	Shank Ø	OAL
DT3MM	2	3/16	2
DT3.5MM	2	3/16	2
DT4MM	2	1/4	2
DT4.5MM	2	1/4	2
DT5MM	3	5/16	2.5
DT5.5MM	3	5/16	2.5
DT6MM	3	3/8	2.5
DT6.5MM	3	3/8	2.5
DT7MM	3	3/8	2.5
DT7.5MM	3	1/2	2.5
DT8MM	3	1/2	2.5
DT8.5MM	3	1/2	2.5
DT9MM	3	1/2	2.5
DT9.5MM	3	1/2	2.5
DT10MM	3	5/8	3.5

US DISTRIBUTOR

Solid Carbide Dovetail Cutters for O-Ring Grooves catalog